S-GA4 FUEL DISPENSER

S-GA4 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 305kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 27

. Oil in separating chamber fail to flow into low pressure chamber because return valve is jammed due to big floater split and much waste in return valve. Many operations without refueling lead to overflow in exhausting pipe. Fuel without data count Pin installed on the elbow of measurement transducer has broken. Replace new elbow or pin. It has some wrong in count pulse of transducer though axis is still rotated. Inspect wiring of double opticaleletric pulse, main board and chipset. Confirm that whether trouble of short circuit on wiring board. 11. Although fuel dispenser normally discharge display screen don’t show data. Failure in PPU change Using multimeter examines parameter lock whether open or closed. Computer of fuel dispenser is on power, but ca fuel dispenser n’t start operation. Firstly inspect keyboard lock’s state, capacitor on wiring board. Measure voltage of power supply (�V, �2 V). Examine switch signal, change when necessary. Inspect boot-strap signal，replace new main board as signal break. Examine power supply wiring if motor stop rotation with signal. Abnormal stop in operation Inspect voltage of power supply (�V, �2 V), change the one that low voltage. Lead connection is not fixed. Tight bolt fixing lead. Wire voltage of motor is unstable. Display screen trouble Change display screen with new one. If still don’t displays replace main board of fuel dispenser Keyboard trouble Replace with a new keyboard, if could work there is wrong in previous keyboard. If still don’t work with a new keyboard, trouble would be in mainboard. Computer doesn’t work on power Inspect voltage of power supply (�V, �2 V),replacing broken one. Examine SW signal; if failure replacing optical board. If SW signal is in normal state, replace main board. Date jump in display screen as hold up or put down nozzle One of reason is leakage on pipeline and bottom valve. Randomly prolong or replace non-standard pipe and hose also make this trouble on fuel dispen fuel dispenser fuel dispenser

a SVC:　　 TotalAmount: yes.　　 SalesItems: no.　　 Loyalty: no.　　 OriginalTransaction: no.　　 RefundValueFromCard Take amount from a SVC:　　 TotalAmount: yes.　　 SalesItems: no.　　 Loyalty: no.　　 OriginalTransaction: no.　　 CardBalanceQuery Reports available amount fr fuel dispenser om a SVC or credit available from credit card:　　 TotalAmount: no.　　 SalesItems: no.　　 Loyalty: no.　　 OriginalTransaction: no.　　 TicketReprint Reprinting the referenced ticket (normally only the last one is possible) whatever it is　　 - request.　　 TotalAmount no.　　 SalesItems: no.　　 Loyalty: no.　　 OriginalTransaction: no.　　 AbortRequest Aborting the referenced request - request.　　 TotalAmount no.　　 SalesItems: no.　　 Loyalty: no.　　 fuel dispenser fuel dispenser

ikely changes in the overall supply of workers. By 2010, the Fed economists reckon, labour supply in America will be rising by a mere 0.4% a year, well under half its current rate. The geezer difference These projections could be too gloomy. Washington s official number-crunchers, such as the Congressional Budget Office, predict that labour-force growth will slow down, but not that dramatically. An unexpected jump in what Dick Berner of Morgan Stanley calls the “geezer labour force�could make a difference as ageing baby-boomers work longer. Men in their 60s are already the fastest-growing segment of the workforce, although this has not made up for the overall decline. A rise in immigration could increase the supply of labour, too, particularly since the fuel dispenser proportion of immigrants who work is higher than that of native-born Americans. As the labour shortage begins to bite, the demand for immigrants should rise. But the politics of the issue argue against a big rise in the next few years. The government is under increasing pressure to crack down on employers who hire illegal workers, and Congress recently passed legislation to build a fence along a large stretch of the Mexican border. It seems very likely, then, that America s labour supply will grow more slowly. And if that happens, potential output growth will too, unless productivity growth accelerates. Unfortunately, the latest evidence suggests that, if anything, productivity growth is slowing unexpectedly. Over the past two years, in the non-farm business sector, it slowed to an annual average of 2% from an average of almost 4% in the previous three years. And even that figure may be too high. The Bureau of Labour Statistics recently said 810,000 more jobs were created between March 2005 and March 2006 than they first thought. Thanks to those extra jobs the productivity figures for 2005 may be revised down by a further half of a percentage point. For the economy as a whole, the figure is some 0.3-0.5 percentage point fuel dispenser fuel dispenser