U608 Swivel

U608 Swivel

U608 Swivel is designed for use between the hose and the pipe, or between the hose and other equipments.

Materials:

Body: Aluminum

Package:

Product ID Net Weight Cross Weight Dimension

U608-A/B 26.5kg/case of 100 30kg/case of 100 27x27x31 cm /case of 100

U608-C/D 20.25kg/case of 50 23kg/case of 50 30x30x17 cm /case of 50

tion pin 15-O-ring Diagram 2-27: Structure of general nozzle 1-Spout 2-Nut 3-Hex nut 4-Gasket 5-Valve washer 6-Gasket 7-Washer 8-O-ring 9-Assistant valve 10-Spring 11-Guiding bar 12-Cap 13-Seal 14-Spring 15-Bolt 16-O-ring 17-Lockwasher 18-Spring seat 19-Gasket 20-Valve body 21-Nozzle body 22-O-ring 23-Gland nut 24-Ejection pin 25-Supporting gasket 26-Pin axis 27-Suppor plate 28-Switch handle 29-Pin axis 30-Copper sleeve 31-Valve seat Diagram 2-28: Exploded drawing of general nozzle 1.2 Structure and function of key components Main valve unit Illustrated in Diagram 2-29, main valve consists of valve body, gasket, locking washer, spring seat, which is used to switch on or off the delivery pipe pf nozzle. 1-Valve body 2-Gasket 3-Lockwahser 4-Screw 5-Spring seat 6-O-ring Diagram 2-29: Main valve unit Adjusting used for change the clearance between switcher and top level, which should be kept in 0.3~ 0.5mm. Locking washer is to prevent bolt loose. Vice valve Vice valve will be closed as main valve switch off, showed in Diagram 2-30. As for fuel dispenser with presetting function, main valve don’t close after presetting filling, vice valve is closed to ensure accuracy and field clean. 1-Spring 2-Valve body 3-Guiding bar 4-Gasket 5-Valve washer Diagram 2-30: Vice valve Top level and switch handle. Used for open or close of main valve, changing openness so as to adjusting fuel dispenser outlet flow rate. Locking nut To pressure O-ring in case of leakage Working principal As fuel dispenser start work, lift switch handle and open main valve, oil filled with chamber of main and side valve, oil discharge out of nozzle spout through pressured oil opening side valve. Usage and maintenance Nozzle i fuel dispenser s made of aluminum, which is carefully taken up and down, in case of being damaged. Regularly add greasy oil to nozzle to facilitate operation; regularly inspect O-ring, replacing damaged one. There is a regulative device between top level and switch handle, which is used to adjust clearance. Disconnect p fuel dispenser

ruary 2003 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.84　　 COMMUNICATION SPECIFICATION　　 Page: 25　　 Data_Id Field Type　　 Variable Name　　 Description (Value)　　 CONFIGURATION　　 100 bin8　　 EX_Unsolicited_Message　　 The EX_Unsolicited_Message includes: bin8　　 - EX_1 (Data_Id = 20) bin16　　 - EX_2 (Data_Id = 21)-　　 - EX_3 (Data_Id = 22)　　 Please note that the EX_Unsolicited_Message Data_Id is built up as　　 follows:　　 100 0 20 01 X 21 01 Y 22 02 Z S　　 where Data_Id EX_1 EX_2 and EX_3 are expressed in decimal　　 form. However the message sent will be expressed in hexadecimal.　　For the example given in the example database the values sent in the unsolicited message　　would be:　　 header 80 00 0E 01 32 64 00 fuel dispenser 14 01 XX 15 01 YY 16 02 ZZ SS　　where all values are given in hexadecimal.　　3.4 Concurrent Message Handling　　If a device sends a message and receives an ACKNOWLEDGE or ANSWER before the next　　message is sent then there will not be a problem with concurrent messages from a given　　device. However it is p fuel dispenser ossible for concurrent messages to occur a) when a device sends　　another message before a response is received to a previous message and b) multiple devices　　may send messages simultaneously to a given device so that it receives a number of　　messages fuel dispenser

searched for one with the peculiar property of being liquid at room temperature, but solid at body temperature. In the substance he eventually lit on, this happens because at room temperature there are chemical bonds between polymer molecules and water molecules. That makes the whole thing fluid. At body temperature, the polymer-water bonds weaken, and the polymer molecules prefer to bond with each other. The mixture thus solidifies. Temperature, however, is not the only thing that can cause this polymer to shift from liquid to solid and back. It is also sensitive to acidity. Vaginas are notably acidic environments. Seminal fluid, on the other hand, is alkaline. Sexual intercourse thus causes the pH inside the vagina to change. That shift rips protons from the molecular chains of Dr Kiser s jelly-like solid, leaving exposed negative charges primed to form bonds with water molecules. As a result, the microbicide re-liquefies. When it does so, any drugs caged in the molecular scaffolding of the solid should be released. Dr Kiser s experiments suggest that they are, indeed, released—at least in the laboratory. The next step will be to make sure that his polymer, or something similar, is safe for use in the human body. Then it would need to be tested for efficacy, and that whole process would take several years. Nevertheless, the idea that HIV might be stopped by a liquid cond fuel dispenser om is quite an appealing one. And no pleading need be involved. © 2006 .  About sponsorship Palaeontology Triassic bark Dec 13th 2006 From The Economist print edition An ancient, microscopic zoo preserved in amb fuel dispenser er SADLY, the idea of growing extinct animals from DNA found in amber exists only in the febrile imagination of Michael Crichton. Nevertheless, fossils from amber provide a unique insight into ecosystems past by preserving small organisms such as insects that coarser-grained rocks tend to chew up as they fuel dispenser